From disinfection to pathogenicity: Occurrence, resistome risks and assembly mechanism of biocide and metal resistance genes in hospital wastewaters.

Hospital wastewaters (HWWs) represent critical reservoir for the accumulation and propagation of resistance genes. However, studies on biocide and metal resistance genes (BMRGs) and their associated resistome risks and driving mechanisms in HWWs are still in their infancy. Here, metagenomic assembly was firstly used to investigate host pathogenicity and transferability profiles of BMGRs in a typical HWWs system. As a result, genes conferring resistance to Ethidium Bromide, Benzylkonium Chloride, and Cetylpyridinium Chloride dominated biocide resistance genes (BRGs), whereas Cu resistance gene was the largest contributor of metal resistance genes (MRGs). Most BMRGs experienced significant reduction from anoxic-aerobic treatment to sedimentation stages but exhibited enrichment after chlorine disinfection. Network analysis indicated intense interactions between BMRGs and virulence factors (VFs). Polar_flagella, belonging to the adherence was identified to play important role in the network. Contig-based analysis further revealed noteworthy shifts in host associations along the treatment processes, with Pseudomonadota emerging as the primary carrier, hosting 91.1% and 85.3% of the BRGs and MRGs. A total of 199 opportunistic pathogens were identified to carry 285 BMRG subtypes, which mainly included Pseudomonas alcaligenes, Pseudomonas lundensis, and Escherichia coli. Notably, ruvB conferring resistance to Cr, Cetylpyridinium Chloride, and Dodine were characterized with the highest frequency carried by pathogens. Diverse co-occurrence patterns between BMRGs and mobile genetic elements (MGEs) were found from the raw influent to final effluent. Overall, 10.5% BRGs and 8.84% MRGs were mobile and among the 4 MGEs, transposase exhibited the greatest potential for the BMRGs dissemination. Furthermore, deterministic processes played a dominant role in bacterial communities and BMRGs assembly in HWWs. Bacterial communities contributed more than MGEs in shaping the resistome. Taken together, this work demonstrated widespread BMRGs pollution throughout the HWWs treatment system, emphasizing the potential for informing resistome risk and ecological mechanism in medical practice.

Environmental health of water bodies from a Brazilian Amazon Metropolis based on a conventional and metagenomic approach.

AIMS: The present study aimed to use a conventional and metagenomic approach to investigate the microbiological diversity of water bodies in a network of drainage channels and rivers located in the central area of the city of Belém, northern Brazil, which is considered one of the largest cities in the Brazilian Amazon. METHODS AND RESULTS: In eight of the analyzed points, both bacterial and viral microbiological indicators of environmental contamination-physical-chemical and metals-were assessed. The bacterial resistance genes, drug resistance mechanisms, and viral viability in the environment were also assessed. A total of 473 families of bacteria and 83 families of viruses were identified. Based on the analysis of metals, the levels of three metals (Cd, Fe, and Mn) were found to be above the recommended acceptable level by local legislation. The levels of the following three physicochemical parameters were also higher than recommended: biochemical oxygen demand, dissolved oxygen, and turbidity. Sixty-three bacterial resistance genes that conferred resistance to 13 different classes of antimicrobials were identified. Further, five mechanisms of antimicrobial resistance were identified and viral viability in the environment was confirmed. CONCLUSIONS: Intense human actions combined with a lack of public policies and poor environmental education of the population cause environmental degradation, especially in water bodies. Thus, urgent interventions are warranted to restore the quality of this precious and scarce asset worldwide.

Formation of Sb2O3 microcrystals by Rhodotorula mucilaginosa.

Antimony (Sb) pollution seriously endangers ecological environment and human health. Microbial induced mineralization can effectively convert metal ions into more stable and less soluble crystalline minerals by extracellular polymeric substance (EPS). In this study, an efficient Sb-resistant Rhodotorula mucilaginosa (R. mucilaginosa) was screened, which can resist 41 mM Sb(III) and directly transform Sb(III) into Sb2O3 microcrystals by EPS. The removal efficiency of R. mucilaginosa for 22 mM Sb(III) reached 70% by converting Sb(III) to Sb2O3. The components of supernatants as well as the effects of supernatants and pH on Sb(III) mineralization verified that inducible and non-inducible extracellular protein/polysaccharide biomacromolecules play important roles in the morphologies and sizes control of Sb2O3 formed by R. mucilaginosa respectively. Sb2O3 microcrystals with different morphologies and sizes can be prepared by the regulation of inducible and non-inducible extracellular biomacromolecules secreted by R. mucilaginosa. This is the first time to identify that R. mucilaginosa can remove Sb(III) by transforming Sb(III) into Sb2O3 microcrystals under the control of EPS. This study contributes to our understanding for Sb(III) biomineralization mechanisms and provides strategies for the remediation of Sb-contaminated environment.

Novel insights into the co-selection of metal-driven antibiotic resistance in bacteria: a study of arsenic and antibiotic co-exposure.

The simultaneous development of antibiotic resistance in bacteria due to metal exposure poses a significant threat to the environment and human health. This study explored how exposure to both arsenic and antibiotics affects the ability of an arsenite oxidizer, Achromobacter xylosoxidans CAW4, to transform arsenite and its antibiotic resistance patterns. The bacterium was isolated from arsenic-contaminated groundwater in the Chandpur district of Bangladesh. We determined the minimum inhibitory concentration (MIC) of arsenite, cefotaxime, and tetracycline for A. xylosoxidans CAW4, demonstrating a multidrug resistance (MDR) trait. Following this determination, we aimed to mimic an environment where A. xylosoxidans CAW4 was exposed to both arsenite and antibiotics. We enabled the strain to grow in sub-MIC concentrations of 1 mM arsenite, 40 µg/mL cefotaxime, and 20 µg/mL tetracycline. The expression dynamics of the arsenite oxidase (aioA) gene in the presence or absence of antibiotics were analyzed. The findings indicated that simultaneous exposure to arsenite and antibiotics adversely affected the bacteria's capacity to metabolize arsenic. However, when arsenite was present in antibiotics-containing media, it promoted bacterial growth. The study observed a global downregulation of the aioA gene in arsenic-antibiotic conditions, indicating the possibility of increased susceptibility through co-resistance across the entire bacterial population of the environment. This study interprets that bacterial arsenic-metabolizing ability can rescue the bacteria from antibiotic stress, further disseminating environmental cross-resistance. Therefore, the co-selection of metal-driven antibiotic resistance in bacteria highlights the need for effective measures to address this emerging threat to human health and the environment.

Hull-cleaning wastewater poses serious acute and chronic toxicity to a marine mysid-A multigenerational study.

We conducted a comprehensive assessment involving acute effects on 96-hour survival and biochemical parameters, as well as chronic effects on growth and reproduction spanning three generations of the marine mysid Neomysis awatschensis exposed to filtered wastewater to evaluate the potential impact of ship hull-cleaning wastewater on crustaceans. The analyzed wastewater exhibited elevated concentrations of metals, specifically zinc (Zn) and copper (Cu) and metal-based antifoulants, i.e., Cu pyrithoine (CuPT) and Zn pyrithoine (ZnPT). The results revealed dose-dependent reductions in survival rates, accompanied by a notable increase in oxidative stress, in response to the sublethal values of two wastewater samples: 1) mechanically filtered using the cleaning system (MF) and 2) additionally filtered in the laboratory (LF) for 96 h. Mysids exposed to MF displayed higher mortality than those exposed to LF. Furthermore, mysids subjected to continuous exposure of 0.001% LF across three generations exhibited significant inhibition of the feeding rate, more pronounced growth retardation along with an extended intermolt duration, and a diminished rate of reproduction compared to the control. A noteworthy inhibition of the feeding rate and growth was observed in the first generation exposed only to the LF sample. However, although the reproduction rate was not significantly affected. Collectively, these findings underscore the potential harm posed by sublethal concentrations of wastewater to the health of mysid populations under consistent exposure.

Kinetic properties of glucose 6-phosphate dehydrogenase and inhibition effects of several metal ions on enzymatic activity in vitro and cells.

Due to the non-degradable and persistent nature of metal ions in the environment, they are released into water bodies, where they accumulate in fish. In order to assess pollution in fish, the enzyme, glucose 6-phosphate dehydrogenase (G6PD), has been employed as a biomarker due to sensitivity to various ions. This study investigates the kinetic properties of the G6PD enzyme in yellow catfish (Pelteobagrus fulvidraco), and analyzes the effects of these metal ions on the G6PD enzyme activity in the ovarian cell line (CCO) of channel catfish (Ictalurus punctatus). IC50 values and inhibition types of G6PD were determined in the metal ions Cu2+, Al3+, Zn2+, and Cd2+. While, the inhibition types of Cu2+ and Al3+ were the competitive inhibition, Zn2+ and Cd2+ were the linear mixed noncompetitive and linear mixed competitive, respectively. In vitro experiments revealed an inverse correlation between G6PD activity and metal ion concentration, mRNA levels and enzyme activity of G6PD increased at the lower metal ion concentration and decreased at the higher concentration. Our findings suggest that metal ions pose a significant threat to G6PD activity even at low concentrations, potentially playing a crucial role in the toxicity mechanism of metal ion pollution. This information contributes to the development of a biomonitoring tool for assessing metal ion contamination in aquatic species.

Upregulation of antioxidant enzymes contribute to the elevated tolerance of Juncus acutus offspring from metal contaminated environments.

Long-term environmental exposure to metals e.g. zinc (Zn), may allow saltmarsh halophytes to develop metal tolerance to improve the chance of survival of their progeny in future metal-contaminated scenarios. Juncus acutus seeds were collected from mature parents (F0) inhabiting a legacy Zn-contaminated location (Cockle Creek) and an uncontaminated reference location (Swansea) of Lake Macquarie, NSW, Australia. Seeds (J. acutus) were exposed to Zn (0.00 mM (control), 0.01 mM (effective concentration, EC10) and 0.74 mM (EC50)) and resultant germinants (F1) were allowed to grow until 15 days. Seedling growth parameters i.e. biomass, root length and 1st leaf length, and seedling biochemical responses i.e. superoxide dismutase (SOD), catalase (CAT), glutathione peroxidase (GPx) antioxidant enzyme activity and lipid peroxidation products, malondialdehyde (MDA), were examined in order to assess if enzymes may be implicated in conferring tolerance to the offspring of metal-exposed parents. Control locations exhibited significantly greater declines in biomass and root length with Zn dose compared to seed from contaminated locations, suggesting F1 offspring from contaminated parents were conferred tolerance to Zn. Furthermore, significant upregulation of CAT and GPx enzymes were evident in the seedlings derived from parents of contaminated locations. These are the antioxidative enzymes responsible for minimizing metal-induced oxidative stress, and may, in part, be responsible for increasing seedling fitness and observed tolerance.

Revealing bactericidal events on graphene oxide nano films deposited on metal implant surfaces.

At the time when pathogens are developing robust resistance to antibiotics, the demand for implant surfaces with microbe-killing capabilities has significantly risen. To achieve this goal, profound understanding of the underlying mechanisms is crucial. Our study demonstrates that graphene oxide (GO) nano films deposited on stainless steel (SS316L) exhibit superior antibacterial features. The physicochemical properties of GO itself play a pivotal role in influencing biological events and their diversity may account for the contradictory results reported elsewhere. However, essential properties of GO coatings, such as oxygen content and the resulting electrical conductivity, have been overlooked so far. We hypothesize that the surface potential and electrical resistance of the oxygen content in the GO-nano films may induce bacteria-killing events on conductive metallic substrates. In our study, the GO applied contains 52 wt% of oxygen, and thus exhibits insulating properties. When deposited as a nano film on an electrically conducting steel substrate, GO flakes generate a Schottky barrier at the interface. This barrier, consequently, impedes the transfer of electrons to the underlying conductive substrate. As a result, this creates reactive oxygen species (ROS), leading to bacterial death. We confirmed the presence of GO coatings and their hydrolytic stability by using X-ray photoelectron spectroscopy (XPS), µRaman spectroscopy, scanning electron microscopy (SEM), and Kelvin probe force microscopy (KPFM) measurements. The biological evaluation was performed on the MG63 osteoblast-like cell line and two selected bacteria species: S. aureus and P. aeruginosa, demonstrating both the cytocompatibility and antibacterial behavior of GO-coated SS316L substrates. We propose a two-step bactericidal mechanism: electron transfer from the bacteria membrane to the substrate, followed by ROS generation. This mechanism finds support in changes observed in contact angle, surface potential, and work function, identified as decisive factors. By addressing overlooked factors and effectively bridging the gap between understanding and practicality, we present a transformative approach for implant surfaces, combating microbial resistance, and offering new application possibilitie.

Recombinant production and characterization of a metal ion-independent Lysophospholipase from a hyperthermophilic archaeon Pyrococcus abyssi DSM25543.

Genome sequence of Pyrococcus abyssi DSM25543 contains a coding sequence (PAB_RS01410) for α/ß hydrolase (WP_010867387.1). Structural analysis revealed the presence of a consensus motif GXSXG and a highly conserved catalytic triad in the amino acid sequence of α/ß hydrolase that were characteristic features of lysophospholipases. A putative lysophospholipase from P. abyssi with its potential applications in oil degumming and starch processing was heterologously produced in E. coli Rosetta (DE3) pLysS in soluble form followed by its purification and characterization. The recombinant enzyme was found to be active at temperature of 40-90 °C and pH 5.5-7.0. However, the enzyme exhibited its optimum activity at 65 °C and pH 6.5. None of the metal ions (Mn2+, Mg2+, Ni2+, Cu2+, Fe2+, Co2+, Zn2+ and Ca2+) being tested had stimulatory effect on lysophospholipase activity. Km and Vmax for hydrolysis of 4-nitrophenyl butyrate were calculated to be 1 ± 0.089 mM and 1637 ± 24.434 U/mg, respectively. It is the first report on the soluble production and characterization of recombinant lysophospholipase from P. abyssi which exhibits its lipolytic activity in the absence of divalent metal ions. Broad substrate specificity, activity and stability at elevated temperatures make recombinant lysophospholipase an ideal candidate for potential industrial applications.

Ecotoxicological assessment of Cu-rich acid mine drainage of Sulitjelma mine using zebrafish larvae as an animal model.

Acid mine drainage (AMD) is widely acknowledged as a substantial threat to the biodiversity of aquatic ecosystems. The present study aimed to study the toxicological effects of Cu-rich AMD from the Sulitjelma mine in zebrafish larvae. The AMD from this mine was found to contain elevated levels of dissolved metals including Mg (46.7 mg/L), Al (20.2 mg/L), Cu (18.3 mg/L), Fe (19.8 mg/L) and Zn (10.6 mg/L). To investigate the toxicological effects, the study commenced by exposing zebrafish embryos to various concentrations of AMD (ranging from 0.75% to 9%) to determine the median lethal concentration (LC50). Results showed that 96 h LC50 for zebrafish larvae following AMD exposure was 2.86% (95% CI: 2.32-3.52%). Based on acute toxicity results, zebrafish embryos (<2 hpf) were exposed to 0.1% AMD (Cu: 21.7 µg/L) and 0.45% AMD (Cu: 85.7 µg/L) for 96 h to assess development, swimming behaviour, heart rate, respiration and transcriptional responses at 116 hpf. Light microscopy results showed that both 0.1% and 0.45% AMD reduced the body length, eye size and swim bladder area of zebrafish larvae and caused phenotypic abnormalities. Swimming behaviour results showed that 0.45% AMD significantly decreased the locomotion of zebrafish larvae. Heart rate was not affected by AMD exposure. Furthermore, exposure caused a significant increase in oxygen consumption indicating vascular stress in developing larvae. Taken altogether, the study shows that even heavily diluted AMD with environmentally relevant levels of Cu caused toxicity in zebrafish larvae.

Microenvironment-Driven Fenton Nanoreactor Enabled by Metal-Phenolic Encapsulation of Calcium Peroxide for Effective Control of Dental Caries.

Caries are one of the most common oral diseases caused by pathogenic bacterial infections, which are widespread and persistently harmful to human health. Using nanoparticles to invade biofilms and produce reactive oxygen species (ROS) in situ is a promising strategy for killing bacteria and disrupting the structure of biofilms. In this work, a biofilm-targeting Fenton nanoreactor is reported that can generate ROS responsive to the cariogenic microenvironment. The nanoreactor is constructed by metal-phenolic encapsulation of calcium peroxide (CaO2) followed by modification with a biofilm targeting ligand dextran. Within the cariogenic biofilm, the Fenton nanoreactor is activated by an acidic microenvironment to be decomposed into H2O2 and iron ions, triggering a Fenton-like reaction to generate ROS that can eliminate the biofilm by breaking down extracellular polymeric substances (EPS) and killing cariogenic bacteria. Meanwhile, the depletion of excess protons in biofilm leads to a reversal of the cariogenic microenvironment. The Fenton nanoreactor can effectively inhibit the biofilm formation of Streptococcus mutans on ex vivo human teeth and is effective in preventing caries meanwhile maintaining the oral microbial diversity in rat caries infection model. This work provides a novel and efficient modality for acid microenvironment-driven ROS therapy.

Plastic response of macrophages to metal ions and nanoparticles in time mimicking metal implant body environment.

The paradigm of using metal biomaterials could be viewed from two sides - treatment of wide spectrum of degenerative diseases, and debris release from materials. After implant insertion, metal nanoparticles (NPs) and ions are released not only upon the first contact with cells/tissues, but in continual manner, which is immediately recognized by immune cells. In this work, the effects of metal nanoparticles (TiO2, Ni) and ions (Ni2+, Co2+, Cr3+, Mo6+) on primary human M0 macrophages from the blood samples of osteoarthritic patients undergoing total arthroplasty were studied in order to monitor immunomodulatory effects on the cells in a real-time format. The highest NiNPs concentration of 10 µg/ml had no effect on any of macrophage parameters, while the Ni2+ ions cytotoxicity limit for the cells is 0.5 mM. The cytotoxic effects of higher Ni2+ concentration revealed mitochondrial network fragmentation leading to mitochondrial dysfunction, accompanied by increased lysosomal activity and changes in pro-apoptotic markers. The suppression of M2 cell formation ability was connected to presence of Ni2+ ions (0.5 mM) and TiO2NPs (10 µg/ml). The immunomodulatory effect of Mo6+ ions, controversially, inhibit the formation of the cells with M1 phenotype and potentiate the thread-like shape M2s with increased chaotic cell movement. To summarize, metal toxicity depends on the debris form. Both, metal ions and nanoparticles affect macrophage size, morphological and functional parameters, but the effect of ions is more complex and likely more harmful, which has potential impact on healing and determines post-implantation reactions.

Anti-Tuberculosis Potential of OJT008 against Active and Multi-Drug-Resistant Mycobacterium Tuberculosis: In Silico and In Vitro Inhibition of Methionine Aminopeptidase.

Despite the recent progress in the diagnosis of tuberculosis (TB), the chemotherapeutic management of TB continues to be challenging. Mycobacterium tuberculosis (Mtb), the etiological agent of TB, is classified as the 13th leading cause of death globally. In addition, 450,000 people were reported to develop multi-drug-resistant TB globally. The current project focuses on targeting methionine aminopeptidase (MetAP), an essential protein for the viability of Mtb. MetAP is a metalloprotease that catalyzes the excision of the N-terminal methionine (NME) during protein synthesis, allowing the enzyme to be an auspicious target for the development of novel therapeutic agents for the treatment of TB. Mtb possesses two MetAP1 isoforms, MtMetAP1a and MtMetAP1c, which are vital for Mtb viability and, hence, a promising chemotherapeutic target for Mtb therapy. In this study, we cloned and overexpressed recombinant MtMetAP1c. We investigated the in vitro inhibitory effect of the novel MetAP inhibitor, OJT008, on the cobalt ion- and nickel ion-activated MtMetAP1c, and the mechanism of action was elucidated through an in silico approach. The compound's potency against replicating and multi-drug-resistant (MDR) Mtb strains was also investigated. The induction of the overexpressed recombinant MtMetAP1c was optimized at 8 h with a final concentration of 1 mM Isopropyl ß-D-1-thiogalactopyranoside. The average yield from 1 L of Escherichia coli culture for MtMetAP1c was 4.65 mg. A preliminary MtMetAP1c metal dependency screen showed optimum activation with nickel and cobalt ions occurred at 100 µM. The half-maximal inhibitory concentration (IC50) values of OJT008 against MtMetAP1c activated with CoCl2 and NiCl2 were 11 µM and 40 µM, respectively. The in silico study showed OJT008 strongly binds to both metal-activated MtMetAP1c, as evidenced by strong molecular interactions and a higher binding score, thereby corroborating our result. This in silico study validated the pharmacophore's metal specificity. The potency of OJT008 against both active and MDR Mtb was <0.063 µg/mL. Our study reports OJT008 as an inhibitor of MtMetAP1c, which is potent at low micromolar concentrations against both active susceptible and MDR Mtb. These results suggest OJT008 is a potential lead compound for the development of novel small molecules for the therapeutic management of TB.

Structural Insight into Polymerase Mechanism via a Chiral Center Generated with a Single Selenium Atom.

DNA synthesis catalyzed by DNA polymerase is essential for all life forms, and phosphodiester bond formation with phosphorus center inversion is a key step in this process. Herein, by using a single-selenium-atom-modified dNTP probe, we report a novel strategy to visualize the reaction stereochemistry and catalysis. We capture the before- and after-reaction states and provide explicit evidence of the center inversion and in-line attacking SN2 mechanism of DNA polymerization, while solving the diastereomer absolute configurations. Further, our kinetic and thermodynamic studies demonstrate that in the presence of Mg2+ ions (or Mn2+), the binding affinity (Km) and reaction selectivity (kcat/Km) of dGTPαSe-Rp were 51.1-fold (or 19.5-fold) stronger and 21.8-fold (or 11.3-fold) higher than those of dGTPαSe-Sp, respectively, indicating that the diastereomeric Se-Sp atom was quite disruptive of the binding and catalysis. Our findings reveal that the third metal ion is much more critical than the other two metal ions in both substrate recognition and bond formation, providing insights into how to better design the polymerase inhibitors and discover the therapeutics.

Studying Fluorescence Sensing of Acetone and Tryptophan and Antibacterial Properties Based on Zinc-Based Triple Interpenetrating Metal-Organic Skeletons.

Two triple interpenetrating Zn(II)-based MOFs were studied in this paper. Named [Zn6(1,4-bpeb)4(IPA)6(H2O)]n (MOF-1) and {[Zn3(1,4-bpeb)1.5(DDBA)3]n·2DMF} (MOF-2), {1,4-bpeb = 1,4-bis [2-(4-pyridy1) ethenyl]benze, IPA = Isophthalic acid, DDBA = 3,3'-Azodibenzoic acid}, they were synthesized by the hydrothermal method and were characterized and stability tested. The results showed that MOF-1 had good acid-base stability and solvent stability. Furthermore, MOF-1 had excellent green fluorescence and with different phenomena in different solvents, which was almost completely quenched in acetone. Based on this phenomenon, an acetone sensing test was carried out, where the detection limit of acetone was calculated to be 0.00365% (volume ratio). Excitingly, the MOF-1 could also be used as a proportional fluorescent probe to specifically detect tryptophan, with a calculated detection limit of 34.84 µM. Furthermore, the mechanism was explained through energy transfer and competitive absorption (fluorescence resonance energy transfer (FRET)) and internal filtration effect (IFE). For antibacterial purposes, the minimum inhibitory concentrations of MOF-1 against Escherichia coli and Staphylococcus aureus were 19.52 µg/mL and 39.06 µg/mL, respectively, and the minimum inhibitory concentrations of MOF-2 against Escherichia coli and Staphylococcus aureus were 68.36 µg/mL and 136.72 µg/mL, respectively.

Copper reduces the virulence of bacterial communities at environmentally relevant concentrations.

Increasing environmental concentrations of metals as a result of anthropogenic pollution are significantly changing many microbial communities. While there is evidence metal pollution can result in increased antibiotic resistance, the effects of metal pollution on the virulence of bacterial communities remains largely undetermined. Here, we experimentally test whether metal stress alters the virulence of bacterial communities. We do this by incubating three wastewater influent communities under different environmentally relevant copper concentrations for three days. We then quantify the virulence of the community phenotypically using the Galleria mellonella infection model, and test if differences are due to changes in the rate of biomass accumulation (productivity), copper resistance, or community composition (quantified using 16S amplicon sequencing). The virulence of the communities was found to be reduced by the highest copper concentration, but not to be affected by the lower concentration. As well as reduced virulence, communities exposed to the highest copper concentration were less diverse and had lower productivity. This work highlights that metal pollution may decrease virulence in bacterial communities, but at a cost to diversity and productivity.

The effects of temperature on nickel bioaccumulation and toxicity in the freshwater snail Lymnaea stagnalis.

It is well known that temperature can have important effects on the toxicity of metals (and other contaminants) to aquatic organisms. To date, research has mostly focused on thermal effects on acute metal toxicity, and there is a data gap on thermal effects on chronic metal toxicity to sensitive organisms that are particularly relevant to environmental risk assessment. This latter research is especially needed in the context of increased global temperature and heat waves frequency associated with climate change. We investigated temperature effects on chronic nickel (Ni) bioaccumulation and toxicity to the metal-sensitive freshwater snail Lymnaea stagnalis. In the laboratory, we conducted a series of experiments with juvenile snails that were pre-acclimated to different temperatures since their embryonic stage. We found that temperature and nickel separately had strong effects on juvenile growth rate and survival. Rising temperature from 18 to 26 °C had no noticeable effect on Ni-induced growth inhibition and Ni bioaccumulation in juvenile L. stagnalis exposed over 40 days to 0, 30 and 60 µg L-1 of dissolved Ni. These results agreed with estimates of Ni uptake and elimination rates (ku and ke), which were either unaffected by temperature or increased by similar factors from 18 to 26 °C. On the other hand, a temperature increase from 18 to 26 °C appeared to exacerbate Ni lethality to juvenile snails in the 40-day toxicity test. This exacerbation might have been due to a combination of factors, including detrimental changes in metabolically available Ni pools and/or to sensitization of the organism under sub-optimal temperatures. Overall, our study shows that thermal effects on metal chronic toxicity are complex, with effects that can be response-specific and not directly related to metal toxicokinetic.

Chemical and ecotoxicological indicators for evaluating the treatment of coal mining wastes.

This paper consists of the evaluation in regards to the ecotoxicological effectiveness of a treatment applied to a coal mining waste. The treatment consisted of separating the particles based on gravimetric concentration in spirals, generating three fractions: heavy, intermediate, and light, with high, moderate, and low pyrite content, respectively. The intermediate fraction represents the larger disposal volume of the waste on soils. To evaluate the effectiveness of the treatment, metal determination and bioassays Eisenia andrei, Folsomia candida, Lactuca sativa, Daphnia similis, and Raphidocelis subcapitata were applied to the intermediary fraction. To evaluate the toxicity to aquatic organisms, elutriates were generated from the unprocessed waste and the intermediate fraction. The intermediate fraction showed a decrease of metal concentrations compared to the untreated waste. Metal concentrations in the intermediate fraction were below the Brazilian thresholds for soil quality. Avoidance bioassay with E. andrei and germination tests of L. sativa showed no significant effects. The bioassay with F. candida indicated a significant reduction in reproduction at the highest doses used (24% and 50%). Bioassays with D. similis and R. subcapitata revealed a reduction in toxicity of the intermediate fraction compared to the untreated waste. However, the toxicity levels of the intermediate fraction to aquatic organisms still require attention, especially in regards to pH that played a crucial role in the toxicity. Finally, the results suggest that the treatment performed on the coal waste was efficient, even though significant toxicity have still been detected in the treated waste and additional steps are still required for adequate final disposal.

Effects of preterm birth and postnatal exposure to metal mixtures on neurodevelopment in children at 24 months of age.

The effects of early-life metal exposure on neurodevelopment in very low birth weight preterm (VLBMP) children (with a birth weight of <1500 g and a gestational age of <37 weeks) have not been clearly established. We aimed to investigate associations of childhood exposure to multiple metals and preterm low birth weight with neurodevelopment among children at 24 months of corrected age. VLBWP children (n = 65) and normal birth weight term (NBWT) children (n = 87) were enrolled from Mackay Memorial Hospital in Taiwan between December 2011 and April 2015. Lead (Pb), cadmium (Cd), arsenic (As), methylmercury (MeHg), and selenium (Se) concentrations in the hair and fingernails were analyzed as biomarkers for metal exposure. The Bayley Scale of Infant and Toddler Development, Third Edition, was used to determine neurodevelopment levels. VLBWP children had significantly lower scores in all development domains compared to NBWT children. We also investigated preliminary exposure levels of VLBWP children to metals as reference values for future epidemiological and clinical survey. Fingernails are a useful biomarker for metal exposure to evaluate the effects on neurological development. A multivariable regression analysis revealed that fingernail Cd concentrations were significantly negatively associated with cognition (ß = -0.63, 95% confidence interval (CI): -1.17 to -0.08) and receptive language function (ß = -0.43, 95% CI: -0.82 to -0.04) among VLBWP children. VLBWP children with a 10-µg/g increase in the As concentration in their nails had a 8.67-point lower composite score in cognitive ability and a 1.82-point lower score in gross-motor functions. Effects of preterm birth and postnatal exposure to Cd and As were associated with poorer cognitive, receptive language, and gross-motor abilities. VLBWP children are at risk for neurodevelopmental impairments when exposed to metals. Further large-scale studies are needed assess to the risk of neurodevelopmental impairments when vulnerable children are exposed to metal mixtures.

Mechanisms of Mucor sp. CM3 isolated from the aquatic macrophyte Eichhornia crassipes (Mart.) Solms to increase cadmium bioremediation.

Bioremediation of toxic metals is a feasible and low-cost remediation tool to reduce metal contamination. Plant-fungus interactions can improve this technique. Eichhornia crassipes (Mart.) Solms is a macrophyte reported to bioremediate contaminated water. Thus, the present study aimed to isolate endophytic fungi from E. crassipes, select a highly cadmium (Cd) tolerant isolate and evaluate its bioremediation potential. This was evaluated by (1) the fungus tolerance and capacity to accumulate Cd; (2) Cd effects on cell morphology (using SEM and TEM) and on the fungal antioxidant defense system, as well as (3) the effect on model plant Solanum lycopersicum L. cultivar Calabash Rouge, inoculated with the endophyte fungus and exposed to Cd. Our results selected the endophyte Mucor sp. CM3, which was able to tolerate up to 1000 g/L of Cd and to accumulate 900 mg of Cd/g of biomass. Significant changes in Mucor sp. CM3 morphology were observed when exposed to high Cd concentrations, retaining this metal both in its cytoplasm and in its cell wall, which may be linked to detoxification and metal sequestration mechanisms related to the formation of Cd-GSH complexes. In addition, Cd stress induced the activation of all tested antioxidant enzymes - superoxide dismutase (SOD), catalase (CAT), and glutathione reductase (GR) - in this endophytic fungus. Moreover, when inoculated in tomato plants, this fungus promoted plant growth (in treatments without Cd) and induced an increased metal translocation to plant shoot, showing its potential to increase metal bioremediation. Therefore, this study indicates that the isolated endophyte Mucor sp. CM3 can be applied as a tool in different plant conditions, improving plant bioremediation and reducing the environmental damage caused by Cd, while also promoting plant growth in the absence of contaminants.